Table of Contents

Answer Expert Verified The cylinder with the greater precision is the 10 ml graduated cylinder. The 50 ml graduated cylinder on the other hand has marks for every 1 ml, this graduation will only allow the user to record measurement up to one significant figure.

## Which has greater accuracy the 10mL or 50ml graduated cylinder?

Answer Expert Verified The cylinder with the greater precision is the 10 ml graduated cylinder. The 50 ml graduated cylinder on the other hand has marks for every 1 ml, this graduation will only allow the user to record measurement up to one significant figure.

## Why is a 10mL graduated cylinder more accurate than a 50 mL graduated cylinder?

Why is a 10ml graduated cylinder more accurate? Well, graduated cylinders have more markings, and are thus designed to be more accurate… Examine this graduated cylinder. It has markings every 1 mL , so you can make measurements to the 1st decimal place as the uncertain digit.

## What is the precision of a 10 mL graduated cylinder?

volume 10 mL, accuracy: 0.1 mL, polymethylpentene.

## What level of precision is a 50ml graduated cylinder?

This type of volumetric glassware is found in three different sizes 10 ml, 50 ml, and 100 ml. Their precision is within 0.01 ml.

## Which are most accurate the 10 mL graduated cylinder or the 10 mL volumetric pipet?

Though a 10mL syringe and graduated cylinder would be quite accurate, the 9mL volumetric pipet is more accurate, and remember the question asked for the best out of the answer choices. A beaker is very inaccurate and should only be used to transfer solutions, not to measure them.

## How accurate is a 100 mL graduated cylinder?

This graduated cylinder has a capacity of 100 ml with graduations marked every 1.0 ml and it has an accuracy of ± 1.0 ml at 20°C. Approximately 25 cm tall and 3 cm in diameter.

## Why graduated cylinder is accurate?

Why is a graduated cylinder more accurate than a beaker? The accuracy of a graduated cylinder is higher because the graduations on the cylinder make it easier to more precisely fill, pour, measure, and read the amount of liquid contained within.

## Why is it better to use a 25 mL graduated cylinder?

Explanation: A marble is not a very large object, so a smaller graduated cylinder is a better choice. A 100 milliliter graduated cylinder is not needed to measure the volume of a small marble, so a 25 milliliter graduated cylinder is the best option.

## Is one graduated cylinder more precise than the other?

Well, graduated cylinders have more markings, and are thus designed to be more accurate Examine this graduated cylinder. It has markings every 1 mL , so you can make measurements to the 1st decimal place as the uncertain digit. Hence, it is reasonable to assume you have measured, say, 52.5 mL .

## What is the smallest division on a 100 mL graduated cylinder?

The smallest division of this graduated cylinder is 1 mL. Therefore, our reading error will be 0.1 mL or 1/10 of the smallest division. An appropriate reading of the volume is 36.5 0.1 mL. An equally precise value would be 36.6 mL or 36.4 mL.

## What is the smallest division on a 50 mL graduated cylinder?

Option C is correct because the smallest divisions on a scale of a 50 mL buret are typically 0.1 mL. Thus, the volume of the sample can be estimated to two decimal places: 18.00 ± 0.01 mL.

## How do you read a 25 mL graduated cylinder?

In the 25-mL graduated cylinder, first subtract 25 mL – 20 mL = 5 mL. Next, count that ten intervals are between the labeled graduations. Therefore, the scale increment is 5 mL/10 graduations = 0.5 mL/graduation.

## How do you read a 500ml graduated cylinder?

With a 50-mL graduated cylinder, read and record the volume to the nearest 0.1 mL. The 10-mL graduated cylinder scale is read to the nearest 0.01 mL and the 500-mL graduated cylinder scale is read to the nearest milliliter (1 mL). A buret is a scaled cylindrical tube attached to a stopcock, or valve.

## What is the precision level of a graduated cylinder?

All graduated glassware is read with one estimated digit, so this measurement is recorded correctly to the nearest 0.1 mL, with an understood uncertainty of ± 0.1 mL.

## What is the limitation of a graduated cylinder?

In general, numerical scales such as the one on this graduated cylinder will permit measurements to one-tenth of the smallest scale division. The scale in this case has 1-mL divisions, and so volumes may be measured to the nearest 0.1 mL.

## Which is more precise burette or graduated cylinder?

Which is more precise burette or graduated cylinder? A buret is a device used to deliver controlled more precise amounts of a liquid than a graduated cylinder. A 50 mL buret is normally calibrated and marked at every 0.1 mL. The volume can be read reproducibly to the nearest 0.02 mL.

## When to use a beaker or graduated cylinder?

Summary of Beaker vs. Graduated Cylinder. While beakers are used for transporting and mixing solutions, graduated cylinders are used to measure the volume of liquids.

## Which volume measuring device is the most accurate according to your results Why?

Volumetric flasks, burets and pipets are the most accurate with tolerances of less than 0.2%. To achieve these accuracies the person using the device needs to use the proper technique and the measurements need to made at the temperature for which the glassware was calibrated (usually 20 degrees C).

## What is a 100 mL graduated cylinder used for?

These 100 ml glass graduated cylinders are used to measure and dilute liquids with accuracy and ease! These class-A, lab quality graduates are designed to deliver accurate measurements while remaining resistant to breakage and a wide range of chemicals.

## What is the mass of a 100 mL graduated cylinder?

How much does a 100ml bottle weigh? Information provided: mass of 100 ml graduated cylinder: 96.70 G + water: 151.15 G volume of water L 54.45 ml metal items: 29.05 G volume of water + metal items 174.65 G hydrometer reading for water: 1.00 g / ml I know the mass is 96.70 G and 151.

## What is the uncertainty of a 100 mL graduated cylinder?

A 100-ml graduated cylinder with 1-ml graduation will have an uncertainty of +0.1mL.

## Which is the most accurate way to read a graduated cylinder?

Reading a Graduated Cylinder Place the graduated cylinder on a flat surface and view the height of the liquid in the cylinder with your eyes directly level with the liquid. The liquid will tend to curve downward. This curve is called the meniscus. Always read the measurement at the bottom of the meniscus.

## What can I use instead of a graduated cylinder?

10 ml graduated cylinder. This is necessary for measuring liquids we will be using. Substitute: a tall, thin glass jar, such as an olive jar; calibrate in convenient units and mark.