You might wonder, “Do I need a sewer line inspection before buying a house?” The answer is yes. A sewer inspection should be a mandatory part of your house inspection checklist. When considering what inspections to get when buying a house, do not overlook the sewer line.
How important is a sewer scope?
A sewer scope sounds like something that happens on your worst day as a home owner – a very smelly, bad day. But – in actuality, a sewer scope can help home owners avoid that terrible day when their sewer system fails causing smells, damage and ultimately a massive repair bill.
How often should you scope your sewer?
Regardless of the age of your sewer pipes, we recommend having a pipe inspection done every year or two.
How serious is sewer pipe stomach?
Sewer line bellies are a common problem that can create aggravating sewer pipe problems for property owners. A sag in a sewer pipe will eventually lead to standing water and sediment collecting in the middle of the line, which in turn can lead to erosion, blockages, and a major backup for the homeowner.
Can tree roots block drains?
Tree roots can also gain access through fractures or cracks that form on the surface of a pipe, causing them to get larger as the root grows. Regardless of where a root gains access, once in a drainage system a growing root can lead to blockages, leaks and even ruptured or burst pipes.
What is a sewer line belly?
Sewer line bellies or low areas become problems when debris collects and causes a blockage or backup. A belly in a sewer line, sag, or low area is often caused by geological events such as soil erosion, foundation settlement, earthquakes, or by human error such as poor soil compaction or poor installation.
Is standing water in sewer line normal?
Most Common Reason for Standing Water in Sewer Lines Sewer bellies. No, that’s not a new jelly bean flavor. Sewer bellies are the most common reason for standing water to develop in your sewer line. Essentially, a sewer belly is a bend or break in your sewer line that disrupts the flow of water, and creates a backup.
Should there be standing water in my sewer line?
If you see any sewage or water around the outside of that cap, you definitely have a blocked sewage drain. If you pull off the cap and see standing water inside the sewer cleanout, that’s also indicative of a blocked sewer drain.
What causes a blocked sewer line?
Grease, oils and fats commonly cause sewer drain clogs. Although it starts as a liquid when it enters a sewer line, FOG eventually hardens and lodges inside the line. Solid FOG traps debris leading to massive sewer blockages.
Can tree roots damage sewer pipes?
Even though tree roots are considered healthy for the soil, tree roots entering your sewer line can cause major damage to pipes and septic tanks because tree roots tend to grow into rough shapes that will invade the inside of your sewer lines causing clogs and slow drains that back up sewage into your home or business.
What dissolves tree roots in sewer lines?
Zep root kill dissolves the excessive roots that accumulate in the drain, sewer pipes and septic field lines that cause pipes to drain slowly or even become completely clogged. It will dissolve the roots inside the pipes without any harm to the trees and shrubs.
How do you protect pipes from tree roots?
Create a Barrier Between Trees and Sewer Lines Slow-release chemicals, such as copper sulfate and potassium hydroxide, are commonly used in residential settings. Spread these growth inhibitors near the sewer line to prevent root growth into the area.
Can sewer lines have bends?
It’s a bad plumbing practice to have a hard 90-degree bend in a horizontal drain line that’s buried in a slab or otherwise hidden. If you have to make a 90-degree bend, use two 45-degree fittings and put a small piece of straight pipe between the fittings, if possible.
How do you fix a sagging sewer line?
The old-fashioned method of repairing a sag is digging and replacing. A contractor digs down into the soil until he reaches the sag. The contractor replaces the section and fills the trench. On average, a dig-and-replace process can cost about $50 to $60 for each foot.
What is a Backfall in plumbing?
Most backfalls or upward sloping occur due to improper installation or shifting of the ground over time. This backfall causes waste to be trapped and not drain. Overtime waste and debris will collect in the upward slope and eventually will cause the drain to clog up due to not being able to drain with gravity.
Does washing machine drain into sewer line?
Washing machine drains are fed by an electric pump, which moves water from inside the cleaning drum, through a flexible drain hose on the underside of the machine, and out into your home sewer system where it makes its way out of the house.
Why is toilet paper coming out of outside drain?
When a blockage occurs in a sewer drain, the toilet paper will generally float to the top of the water column. Therefore, when you add more wastewater into the drain, say from a shower, it will cause the toilet paper to rise further in the drain until it eventually overflows onto the ground around the drain.
How do you know if your sewer line has collapsed?
8 Broken Sewer Line Symptoms An Odor of Sewer Gas. Slow Drains. Clogs and Backups. Lush, Green Lawn Area. Soggy Lawn. Insect and Rodent Infestation. Mold & Mildew. Broken Slabs and Wall Cracks.