Table of Contents
For the most authentic look, we recommend measuring only the window opening not including any frame or trim around it. Typically, the width of your shutters should be half of your total window width. However, vinyl shutters are available in a handful of sizes.
How much bigger should shutters be?
Shutter size should be between 25-50% of the window width in order to remain aesthetically pleasing. Never install house shutters that are wider than the window.
How wide should shutters be for double window?
When using vinyl shutters on windows that are wider than 50 inches, we recommend using double wide vinyl shutters.Shutter Width. Width of your windows Recommended shutter width 24″ or smaller 9″, 9¼” 24″ to 28″ 12″ 28″ to 36″ 12″, 14½”, or 15″ 36″ to 40″ 14½” or 15″.
How wide should board and batten shutters be?
Building Board and Batten Shutters Go ahead and cut all of your boards to length on a miter saw, and then make any rips that you need to accommodate the width of your window. Each batten will run diagonally across the boards and should be just shy of the width of your shutter.
Should picture windows have shutters?
Contrary to popular belief, not every window needs shutters. Proper shutters should at least appear large enough to cover the entirety of the window when shut (as that’s, you know, the whole point of shutters). Shutters should be avoided on double-mulled windows, picture windows, bay windows, and most dormer windows.
Can you trim vinyl shutters?
It is best to trim the shutters with a stationary power saw, like a power miter saw, a table saw or a radial arm saw, because it is difficult to make accurate cuts with a hand saw. Trim the bottom of the shutters first, but do not cut off more than three-quarters of an inch.
Should shutters be same height as window?
For the most authentic look, we recommend measuring only the height of the window opening not including any frame or trim around the window. It should look like the shutters could close inside the window opening. It is generally recommend that you go with the closest height available.
How far should shutters be from window?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
How do you measure a double window for shutters?
The height of the shutter is usually the height of the opening, not counting the window sill. Double Windows: For double windows, divide the opening width by 4. For consistency, if the width is close to the measurements for your single windows, use the single width.
Do shutters increase home value?
If you’re trying to sell your home, adding shutters can make your home instantly more valuable. One reason for this is that high-quality shutters are classic and are liked by most buyers. shutters are custom-made for the windows, which means that the shutters will remain with the home once it’s sold.
Can you use untreated wood for shutters?
There are definitely more than one way to construct and hang shutters – I am simply sharing how we did it! Supplies needed to build shutters: Untreated Pine (we used 1.5 inch thick pine wood for the backboards and 3/4 inch thick pine for the cross board)Sep 21, 2016.
Are board and batten shutters popular?
Existing on historical cottages, European homes, and early American colonials for centuries, these classic shutters continue to be a popular choice, especially when the homeowner wants to create a rustic or modern farmhouse feel.
How do you measure house shutters?
Measure for the shutter height at the left side, middle, and right side of the window opening from the top of the window to the bottom excluding any window sill. If the heights vary at each of these points, use the SMALLEST of the three measurements. This measurement will be the height of the shutter you need to order.
Can you paint vinyl shutters?
Yes, you can repaint plastic or vinyl shutters. Rinse off the soap with a hose, and allow the shutters to dry before painting. When painting plastic or vinyl, use a high quality, exterior, acrylic latex paint or a paint made specifically for plastic.
When should you not use shutters?
You should not add shutters to the following: Double mulled windows. Windows that are winder than they are tall. Bay windows. One side of a window, leaving the opposite side unshuttered. Windows that are so close, an open shutter would obscure part of the adjoining window.
Do houses look better without shutters?
Absolutely not, and many, many houses would look much better without shutters, rather than with “today’s” shutters. For starters, many shutters today serve no purpose, other than to add an accent color, and to fill in space around windows.
Are shutters out of style?
When looking at the trend chart, it appears “plantation shutters” as a search term online is trending slightly downward, but that was a few years ago after reaching it’s most popular era. It’s flat-lined for now which means while it’s not trending upward, it’s sufficiently popular so as to not be “out of style”.
How do you measure for functional exterior shutters?
Measure for the shutter height at the left side, middle, and right side of the window opening from the top of the window to the bottom excluding any window sill. If the heights vary at each of these points, use the smallest of the three measurements. This measurement will be the height of the shutter you need to order.
How do you measure for Batten and board shutters?
Measure. For working shutters, to find the width of each one, measure between the window’s side casings, divide by 2, and subtract ½ inch for clearance. Then, to find the width of the boards, subtract ⅛ inch for each gap and divide by the number of boards—four in our case.
